There is no real consensus yet on how to best combine data from several studies of a diagnostic test. I will outline a few approaches that seem to make sense. In addition to this page
 I have a general overview on metaanalysis and a nontechnical introduction on the practical interpretation of a metaanalysis.
Direct analysis of sensitivity/specificity
The simplest overall estimate of sensitivity (sens) or specificity (spec) is to just combine all the studies in a pot and stir. Just count the number of true positives (tp)
 false negatives (fn)
 true negatives (tn) and false positives (fp) in each study. The overall sensitivity would have the sum of the individual true positive values in the numerator and the sum of the individual true positive plus false negative values in the denominator.
This is equivalent to a weighted average of the individual sensitivities where the weights for each individual study is simply the individual true positive plus false negative values. You would calculate an overall estimate of sp.
The tricky part comes when you try to define a confidence interval for the overall estimate. This confidence interval is effectively a combination of the standard errors that you would assign to each individual study.
A first attempt might be to define the standard error of an individual study using the classic binomial formula. Writing the standard error in terms of true positive and false negative values
 you would get
The problem with this formula for the standard error is that it gives
less weight to studies where sensitivity is close to 50% and greater
weight to studies where sensitivity is much smaller than 50% or much
larger than 50%. Another problem occurs when one or more of the
sensitivities is 100%. The standard error using a binomial
distribution equals zero for those studies with 100% sensitivity,
which seems at first like a good thing. But when one study has
standard error of zero
 the metaanalysis model will try to give it an infinite weight
 which is not at all a good thing.
One way to avoid some of these problems is to estimate the standard error
 not using the individual sensitivities
 but the overall sensitivity.
Since the numerator is now the same for every study
 you no longer have the problem where studies with sensitivities near 50% get much smaller weights than studies with sensitivities much smaller or much larger than 50%. This approach also avoids the problem when a study has 100% sensitivity.
It’s interesting to note that
 the overall estimate and the standard error for the overall sensitivity using this particular metaanalysis model with a fixed effects estimate matches perfectly with the traditional binomial confidence interval that you might apply. This is easy enough to show because
which implies that
For a random effects model
 the results are a little more complicated and they do not exactly match the traditional binomial confidence interval formula.
Example: In an article describing systematic reviews of diagnostic and screening tests,
 Systematic reviews in health care: Systematic reviews of evaluations of diagnostic and screening tests. Deeks JJ. British Medical Journal 2001: 323(7305); 15762. [Medline]](http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=PubMed&list_uids=11463691&dopt=Abstract) [Full text]](http://bmj.bmjjournals.com/cgi/content/full/323/7305/157) [PDF]](http://bmj.bmjjournals.com/cgi/reprint/323/7305/157.pdf)
data from 20 studies of endovaginal ultrasonography for detecting endometrial cancer are presented. I typed the data in as a comma separated file.
study,tp,fn,tn,fp Abu Hmeidan,81,5,186,273 Auslender,16,0,48,90 Botsis,8,0,14,98 Cacclatore,4,0,30,11 Chan,15,2,15,35 Dorum,12,3,34,51 Goldstein,1,0,16,11 Granberg,18,0,32,125 Hanggi,18,3,13,55 Karlsson (a),112,2,414,601 Karlsson (b),14,1,33,57 Klug,7,1,44,127 Malinova,57,0,26,35 Nasri (a),7,0,14,38 Nasri (b),6,0,24,59 Petrl,18,1,96,35 Taviani,2,0,18,21 Varner,1,1,4,9 Weigel,37,0,91,72 Wolman,4,0,18,32
and here is the R code to read in an compute the metaanalysis models.
library(meta) f0 < "X:/webdata/EndovaginalUltrasonography.csv" deeks.example.dat < read.csv(f0) attach(deeks.example.dat) sens < tp / (tp + fn) sens.overall < sum(tp) / sum(tp + fn) spec < tn / (tn + fp) spec.overall < sum(tn) / sum(tn + fp) par(mar=c(5.1,4.1,0.1,0.1)) plot(1spec,sens,xlim=0:1,ylim=0:1) points(1spec.overall,sens.overall,pch="+",cex=2)
The last three lines create a graph of the data
 which is shown below. The par() function adjusts the margins of the graph to make more effective use of the available space on the screen. The plot() function creates the axes and draws a circle at each individual sens, 1spec pair. The points() command adds a big plus sign at the overall estimate.
Plotting 1spec on the xaxis
 which seems odd
 but it is intended to have the same orientation as an ROC curve. In fact
 this plot is often called an SROC (Summary Receiver Operating Characteristic) plot.
I experimented with trying to show the confidence limits for each study in the graph itself
 by drawing rectangles with the width representing confidence limits for 1spec and the height representing confidence limits for sens. Unfortunately
 this graph was too cluttered to be useful.
The computations for the actual metaanalysis are shown below. The code is a bit cryptic perhaps
 but I am using “te” as an abbreviation for “treatment effect” and “se” as an abbreviation for “standard error.” The metagen() function has similar notation. The only thing that is a bit confusing perhaps is the sm= portion. The letters “sm” stand for “summary measure. This is a label that metagen uses to make the output look nicer.
`te1 < sens se1 < sqrt(sens.overall * (1  sens.overall) / (tp + fn)) deeks1.ma < metagen(TE=te1
 seTE=se1
 studlab=study
 sm=“Sensitivity”) te2 < spec se2 < sqrt(spec.overall * (1  spec.overall) / (tn + fp)) deeks2.ma < metagen(TE=te2
 seTE=se2
 studlab=study
 sm=“Specificity”)`
and here is the output
> deeks1.ma Sensitivity 95%CI %W(fixed) %W(random) Abu Hmeidan 0.9419 [0.8997; 0.9840] 18.82 10.27 Auslender 1.0000 [0.9022; 1.0978] 3.50 5.62 Botsis 1.0000 [0.8617; 1.1383] 1.75 3.61 Cacclatore 1.0000 [0.8044; 1.1956] 0.88 2.10 Chan 0.8824 [0.7875; 0.9772] 3.72 5.81 Dorum 0.8000 [0.6990; 0.9010] 3.28 5.42 Goldstein 1.0000 [0.6088; 1.3912] 0.22 0.60 Granberg 1.0000 [0.9078; 1.0922] 3.94 5.99 Hanggi 0.8571 [0.7718; 0.9425] 4.60 6.47 Karlsson (a) 0.9825 [0.9458; 1.0191] 24.95 10.77 Karlsson (b) 0.9333 [0.8323; 1.0344] 3.28 5.42 Klug 0.8750 [0.7367; 1.0133] 1.75 3.61 Malinova 1.0000 [0.9482; 1.0518] 12.47 9.37 Nasri (a) 1.0000 [0.8521; 1.1479] 1.53 3.27 Nasri (b) 1.0000 [0.8403; 1.1597] 1.31 2.91 Petrl 0.9474 [0.8576; 1.0371] 4.16 6.16 Taviani 1.0000 [0.7233; 1.2767] 0.44 1.15 Varner 0.5000 [0.2233; 0.7767] 0.44 1.15 Weigel 1.0000 [0.9357; 1.0643] 8.10 8.21 Wolman 1.0000 [0.8044; 1.1956] 0.88 2.10 Number of trials combined: 20 Sensitivity 95%CI z p.value Fixed effects model 0.9584 [0.9401; 0.9767] 102.6404 < 0.0001 Random effects model 0.9481 [0.9171; 0.9792] 59.8249 < 0.0001 Quantifying heterogeneity: tau^2 = 0.002; H = 1.43 [1.1; 1.85]; I^2 = 51% [18.1%; 70.7%] Test of heterogeneity: Q d.f. p.value 38.75 19 0.0048 Method: Inverse variance method > deeks2.ma Specificity 95%CI %W(fixed) %W(random) Abu Hmeidan 0.4052 [0.3606; 0.4498] 15.27 5.83 Auslender 0.3478 [0.2665; 0.4292] 4.59 5.46 Botsis 0.1250 [0.0347; 0.2153] 3.73 5.35 Cacclatore 0.7317 [0.5825; 0.8810] 1.36 4.49 Chan 0.3000 [0.1648; 0.4352] 1.66 4.71 Dorum 0.4000 [0.2963; 0.5037] 2.83 5.17 Goldstein 0.5926 [0.4087; 0.7765] 0.90 3.97 Granberg 0.2038 [0.1275; 0.2801] 5.22 5.52 Hanggi 0.1912 [0.0753; 0.3071] 2.26 4.99 Karlsson (a) 0.4079 [0.3779; 0.4379] 33.78 5.93 Karlsson (b) 0.3667 [0.2659; 0.4674] 3.00 5.21 Klug 0.2573 [0.1842; 0.3304] 5.69 5.56 Malinova 0.4262 [0.3039; 0.5486] 2.03 4.90 Nasri (a) 0.2692 [0.1367; 0.4018] 1.73 4.75 Nasri (b) 0.2892 [0.1843; 0.3941] 2.76 5.15 Petrl 0.7328 [0.6493; 0.8163] 4.36 5.43 Taviani 0.4615 [0.3085; 0.6146] 1.30 4.43 Varner 0.3077 [0.0426; 0.5728] 0.43 2.91 Weigel 0.5583 [0.4834; 0.6331] 5.42 5.54 Wolman 0.3600 [0.2248; 0.4952] 1.66 4.71 Number of trials combined: 20 Specificity 95%CI z p.value Fixed effects model 0.3894 [0.3719; 0.4068] 43.7721 < 0.0001 Random effects model 0.3845 [0.3216; 0.4475] 11.9685 < 0.0001 Quantifying heterogeneity: tau^2 = 0.0172; H = 3.26 [2.77; 3.85]; I^2 = 90.6% [86.9%; 93.2%] Test of heterogeneity: Q d.f. p.value 202.17 19 < 0.0001 Method: Inverse variance method
Notice that there is substantial evidence of heterogeneity in both the sensitivity and specificity values.
Analysis of sensitivity/specificity on the log odds scale
Another approach is to transform the sensitivity/specificity to the log odds scale before entering the data into a metaanalysis model. The log odds transformation is a common transformation for binomial data and serves as the heart of a logistic regression model. The standard error for the log odds sensitivity has a nice simple approximation. To derive this
 you have to remember a simple formula about variances of a function.
This formula relies on two things you forgot from your days of calculus
 how to take a derivative and how to apply a Taylor series expansion.
The details are tedious
 but not difficult. When you use this formula on the log odds function
 you get the following approximation.
Compare this to the standard error for sensitivity shown above. The numerator for the standard error has now moved in with its downstairs neighbor
 leaving the upstairs empty. For the log odds for sensitivity
 this the opposite problem from the sensitivity. Studies with sensitivity close to 50% have greater weight on the log odds scale than studies with sensitivity larger than 50%.
You can simplify this formula further. Note that the denominator of sens~i~ can cancel out the tp~i~+fn~i~ term right next to it. With a bit more algebra
 you can get
The log odds transformation also has some problems when the sensitivity is 100%. A simple fix is to add an arbitrary constant (usually 0.5) to both the numerator and denominator. Another approach would be to use the more complex formula listed above
 but substitute the overall sensitivity for the individual sensitivity.
Example: Let’s use the example in Deeks 2001 again. Here is the R code to compute log odds and analyze the data in a metaanalysis model. Note that the pmax function replaces the zeros in fn with 0.5.
logit < function(p) {log(p)log(1p)} fn.adj < pmax(fn,0.5) sens < tp/(tp+fn.adj) te3 < logit(sens) se3 < sqrt(1/tp+1/fn.adj) deeks3.ma < metagen(TE=te3,seTE=se3,studlab=study,sm="Log Odds Sens") spec < tn/(tn+fp) te4 < logit(spec) se4 < sqrt(1/tn+1/fp) deeks4.ma < metagen(TE=te4,seTE=se4,studlab=study,sm="Log Odds Spec")
Here is the output. Using the summary function results in a briefer output because the results of individual studies are not shown.
summary(deeks3.ma) Number of trials combined: 20 Log Odds Sens 95%CI z p.value Fixed effects model 2.4775 [2.0562; 2.8987] 11.5269 < 0.0001 Random effects model 2.4761 [2.0318; 2.9204] 10.9228 < 0.0001 Quantifying heterogeneity: tau^2 = 0.0551; H = 1.03 [1; 1.27]; I^2 = 5.4% [0%; 38.1%] Test of heterogeneity: Q d.f. p.value 20.07 19 0.3901 Method: Inverse variance method summary(deeks4.ma) Number of trials combined: 20 Log Odds Spec 95%CI z p.value Fixed effects model 0.4277 [0.5036; 0.3518] 11.0403 < 0.0001 Random effects model 0.5033 [0.7668; 0.2399] 3.7446 0.0002 Quantifying heterogeneity: tau^2 = 0.292; H = 3.07 [2.58; 3.64]; I^2 = 89.4% [85%; 92.5%] Test of heterogeneity: Q d.f. p.value 178.76 19 < 0.0001 Method: Inverse variance method
You need to do a few additional calculations to get sensitivity transformed back to the original measurement scale. You can define a function in R to do this calculation for you. I call it the expit function
 which is the inverse of the logit function.
expit < function(log.odds) {exp(log.odds)/(1+exp(log.odds))}
With this function
 you can now take the estimates and confidence limits on the log odds scale and transform them back to the original scale.
attach(deeks3.ma) est.and.cl.fixed < TE.fixed+c(0,1.96,1.96)*seTE.fixed round(100*expit(est.and.cl.fixed),1) 92.3 88.7 94.8 est.and.cl.random < TE.random+c(0,1.96,1.96)*seTE.random round(100*expit(est.and.cl.random),1) 92.2 88.4 94.9 attach(deeks4.ma) est.and.cl.fixed < TE.fixed+c(0,1.96,1.96)*seTE.fixed round(100*expit(est.and.cl.fixed),1) 39.5 37.7 41.3 est.and.cl.random < TE.random+c(0,1.96,1.96)*seTE.random round(100*expit(est.and.cl.random),1) 37.7 31.7 44.0
The estimated sensitivity and 95% confidence limits under the fixed effects model are 92.3% (88.7% to 94.8%). The estimates and limits change only slightly under than random effects model. The estimated specificity and 95% confidence limits under the fixed effect model are 39.5% (37.7% to 41.3%). Under the random effects model
 the estimate is a bit lower and the confidence limits are much wider.
Analysis of the diagnostic odds ratio
A third approach is to compute the diagnostic odds ratio
 which compares the odds for sensitivity to the odds for specificity.
Notice how the denominator looks like we accidentally switched things. That was not a mistake. The diagnostic odds ratio is effectively the odds of TPR (the true positive rate or sens) divided by the odds of FPR (the false positive rate or 1spec).
The first advantage of this approach is that you can use wellknown approaches for combining multiple odds ratios. The other advantage is that is analyzes sensitivity and specificity as a pair. Some studies may exhibit heterogeneity in the individual sensitivity or specificity values because one researcher may have tried to maximize sensitivity at the expense of specificity
 another may have tried to maximize specificity at the expense of sensitivity
 and a third may have tried to balance the two. If there is heterogeneity
 then the overall estimates of sensitivity and specificity may be too low.
Although there are no guarantees
 the diagnostic odds ratio should exhibit less heterogeneity. The problem with the diagnostic odds ratio is that no one has a very good feel on what it actually represents. One way of thinking about the diagnostic odds ratio is to swap a couple of terms in the fraction.
So you might interpret the diagnostic odds ratio as the spread between the two likelihood ratios. If
 for example
 the likelihood ratio for a positive test is 10 and is 0.5 for a negative test
 then there is a 20 fold change. Another way of interpreting this is that the posttest odds would be 20 fold higher for a positive test than for a negative test.
The book on metaanalysis by Sutton et al suggests that you model the heterogeneity in the diagnostic odds ratio using the following regression model
You might recognize D as the diagnostic odds ratio. The variable S is a bit harder to visualize
 but you can rewrite it as
This represents the tendency of an individual study to skew the test more towards sensitivity or more towards specificity.
Here’s an example of the problems that can happen when different studies skew more towards sensitivity and others more towards specificity. Imagine a diagnostic test that takes on a range of values. This test follows a bell shaped curve both in the diseased and the healthy populations and the two bell curves are set two standard deviations apart. You could set a cutpoint to maximize specificity
 to maximize sensitivity
 or something in between.
This series of graphs shows what happens across a range of cutpoints.
When you graph the data on an SROC plot
 you get a nice distribution of values. Notice
 however
 that the average of all these sensitivities and specificities is pushed further away from the upper left hand corner than any of the individual sensitivity/specificity pairs.
By fitting a model to the diagnostic odds ratio
 and assessing heterogeneity in that odds ratio
 you hope to avoid this obvious underestimate of sensitivity and specificity.
When you fit the regression model
 you are hoping is that the slope term is zero. That tells you that the estimated intercept is a valid estimate across the range of S values.
It’s unclear whether to use a weighted regression model or an unweighted regression model for these data.
fn.adj < pmax(fn,0.5)
tpr < tp/(tp+fn.adj)
fpr < fp/(tn+fp)
d < logit(tpr)logit(fpr)
s < logit(tpr)+logit(fpr)
se.d < sqrt(1/tp+1/fn.adj+1/tn+1/fp)
w < 1/se.d^2
unweighted.regression < lm(d~s)
weighted.regression < lm(d~s,weights=w)
par(mar=c(5.1,4.1,0.6,0.6))
plot(s,d)
abline(unweighted.regression)
abline(weighted.regression,lty=2)`
For this data set
 it appears that there is a nonzero slope
 which makes interpretation of the combined diagnostic odds ratio problematic.
deeks5.ma < metagen(TE=d,seTE=se.d,studlab=study,sm="Log Diagnostic Odds Ratio") summary(deeks5.ma) Number of trials combined: 20 Log Diagnostic Odds Ratio 95%CI z p.value Fixed effects model 1.9772 [1.5400; 2.4145] 8.8633 < 0.0001 Random effects model 1.9732 [1.3618; 2.5847] 6.3249 < 0.0001 Quantifying heterogeneity: tau^2 = 0.6555; H = 1.27 [1; 1.67]; I^2 = 38.4% [0%; 64%] Test of heterogeneity: Q d.f. p.value 30.87 19 0.0418 Method: Inverse variance method
Additional reading

Reporting of measures of accuracy in systematic reviews of diagnostic literature. Honest H

Khan KS. BMC Health Serv Res 2002: 2(1); 4. [Medline]](http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=PubMed&list_uids=11884248&dopt=Abstract) [Abstract]](http://www.biomedcentral.com/14726963/2/4/abstract) [Full text]](http://www.biomedcentral.com/14726963/2/4) [PDF]](http://www.biomedcentral.com/content/pdf/1472696324.pdf)

Conducting systematic reviews of diagnostic studies: didactic guidelines. Deville WL

Buntinx F

Bouter LM

Montori VM

De Vet HC

Van Der Windt DA

Bezemer P. BMC Med Res Methodol 2002: 2(1); 9. [Medline]](http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=PubMed&list_uids=12097142&dopt=Abstract) [Abstract]](http://www.biomedcentral.com/14712288/2/9/abstract) [Full text]](http://www.biomedcentral.com/14712288/2/9) [PDF]](http://www.biomedcentral.com/content/pdf/1471228829.pdf)

Systematic reviews in health care: Systematic reviews of evaluations of diagnostic and screening tests. Deeks JJ. British Medical Journal 2001: 323(7305); 15762. [Medline]](http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=PubMed&list_uids=11463691&dopt=Abstract) [Full text]](http://bmj.bmjjournals.com/cgi/content/full/323/7305/157) [PDF]](http://bmj.bmjjournals.com/cgi/reprint/323/7305/157.pdf)
You can find an earlier version of this page on my original website.